Paper
12 March 2009 Systematic study of the impact of curved active and poly contours on transistor performance
Author Affiliations +
Abstract
Rigorous 3D process and device simulation has been applied to transistors with curved channel shapes that are inevitable due to the optical proximity effects. The impact of channel curvature on the transistor performance has been benchmarked using the universal Ion/Ioff coordinates. Systematic study of the different non-rectangular channel shapes included straight lines at an angle different than 90 degrees and concave and convex shapes with different curvature radii. The study reveals that any deviation from the ideal rectangular shape affects transistor performance. The amount of enhancement or degradation depends on particular shape, with on current, threshold voltage, and off current responding very differently to the same shape variation. The type and amount of performance variation is very different for the distorted channel length (i.e. poly gate shape) vs distorted channel width (i.e. active layer shape). Degradation of over 50% in the on current at a fixed off current has been observed in the most unfavorable cases for each of the two critical mask layers. On the other hand, a desirable over 3x off current reduction at a fixed on current can be achieved by selecting a beneficial channel shape.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Victor Moroz, Munkang Choi, and Xi-Wei Lin "Systematic study of the impact of curved active and poly contours on transistor performance", Proc. SPIE 7275, Design for Manufacturability through Design-Process Integration III, 72751B (12 March 2009); https://doi.org/10.1117/12.814369
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Transistors

Ions

Shape analysis

Solids

Channel projecting optics

Device simulation

Line edge roughness

Back to Top