5 May 2009 Fabrication and testing of a 600mm diameter brazing SiC mirror
Author Affiliations +
Proceedings Volume 7281, 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes; 72810O (2009) https://doi.org/10.1117/12.831449
Event: AOMATT 2008 - 4th International Symposium on Advanced Optical Manufacturing, 2008, Chengdu, Chengdu, China
Abstract
SiC is a preferential material for space large aperture mirror at present. Aperture of 1 meter sic mirror can meet most requirements of space optical systems. For larger aperture sic mirror, it is not economical and safe to make the monolithic body directly. The SiC mirror brazed assembly with several segments can solve these problems. In this paper, one Φ600 mm sic plane mirror as demonstration welded with 3 radial segments is roughly grinded to the required figure at first, then the mirror is finely grinded and polished by CCOS technology, the RMS of the figure error is less than 1/20λ (λ = 632.8nm) finally. The problems of the preferential removal near braze joint and material removing rate influenced by deformation of mirror surface are solved. Methods of reducing the residual stress of mirror are discussed. At last, some measurements and experiments are carried on, and the results conclude that the brazed SiC mirror can meet the requirement of large aperture optical systems.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Bin-zhi Zhang, Bin-zhi Zhang, Xu Wang, Xu Wang, Xiao Kun Wang, Xiao Kun Wang, Zhong-yu Zhang, Zhong-yu Zhang, Xue-jun Zhang, Xue-jun Zhang, } "Fabrication and testing of a 600mm diameter brazing SiC mirror", Proc. SPIE 7281, 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Large Mirrors and Telescopes, 72810O (5 May 2009); doi: 10.1117/12.831449; https://doi.org/10.1117/12.831449
PROCEEDINGS
5 PAGES


SHARE
RELATED CONTENT

NTSIC(New Technology SiC): the progress of recent two years
Proceedings of SPIE (November 21 2017)
A new technological step for sic mirrors preparing OTOS
Proceedings of SPIE (November 17 2017)
NIRSpec optics development: final report
Proceedings of SPIE (November 20 2017)
Freeform design and fabrication Where the proof of the...
Proceedings of SPIE (January 05 2018)

Back to Top