20 May 2009 Finite element simulation and experimental research in cutting forces of KDP crystal
Author Affiliations +
Proceedings Volume 7282, 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 72820B (2009) https://doi.org/10.1117/12.830793
Event: AOMATT 2008 - 4th International Symposium on Advanced Optical Manufacturing, 2008, Chengdu, Chengdu, China
Abstract
With the application of finite element (FE) software, a finite element model is established to simulate the cutting procedure for KDP crystals. Based on this model, the influential factors on cutting force of KDP crystal in ultra-precision cutting is analyzed. The study shows that the cutting forces will enlarge with the increment of the depth of cut, but the influence of depth of cut on the cutting force is more significant. The cutting force decreases as the cutting speed increases. The surface roughness decreases as the negative rake increases in the same cutting condition. Super-smooth surface of KDP crystal can be obtained when edge angle is negative rake angle. Finally, cutting experiments are carried out to validate the FE simulated results.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jinghe Wang, Jinghe Wang, Qingxin Meng, Qingxin Meng, Hongxiang Wang, Hongxiang Wang, Shen Dong, Shen Dong, Jian Guo, Jian Guo, } "Finite element simulation and experimental research in cutting forces of KDP crystal", Proc. SPIE 7282, 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72820B (20 May 2009); doi: 10.1117/12.830793; https://doi.org/10.1117/12.830793
PROCEEDINGS
5 PAGES


SHARE
Back to Top