Translator Disclaimer
20 May 2009 Manufacturing of the 1070mm F/1.5 ellipsoid mirror
Author Affiliations +
Proceedings Volume 7282, 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 728210 (2009) https://doi.org/10.1117/12.830818
Event: AOMATT 2008 - 4th International Symposium on Advanced Optical Manufacturing, 2008, Chengdu, Chengdu, China
Abstract
The manufacturing procedure of a φ1070mm in diameter F/1.5 ellipsoid mirror is introduced in detail. For testing the rough-ground surface, guiding shaping and fine grinding, a three dimension X-θ-Z profilometer is developed, the instrument measures surface profiles with 1μm accuracy and the biggest mirror being tested is φ1200mm in diameter. During polishing and fine figuring, we chose null test by null corrector with point source at infinity, the designed null corrector includes two piece of lenses and the designed residual wave front aberration is less than 0.008λ(λ=0.6328μm)PV. For avoiding the influence of gravity deformation during polishing and testing, a kind of support system with multipoint unequal support force is developed by applying FEA-based optimization. The mirror was finally figured to the shape accuracy of 0.016λRMS.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peiji Guo, Jingchi Yu, Yaoming Zhang, and Gufeng Qiu "Manufacturing of the 1070mm F/1.5 ellipsoid mirror", Proc. SPIE 7282, 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728210 (20 May 2009); https://doi.org/10.1117/12.830818
PROCEEDINGS
5 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT


Back to Top