20 May 2009 Novel method for optimizing polishing tool-path in CCOS based on weighted-iterative algorithm
Author Affiliations +
Proceedings Volume 7282, 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 728214 (2009) https://doi.org/10.1117/12.830823
Event: AOMATT 2008 - 4th International Symposium on Advanced Optical Manufacturing, 2008, Chengdu, Chengdu, China
Abstract
In Computer Controlled Optical Surfacing (CCOS), polishing tool-path is the base of solving other control parameters such as dwell time. In order to improve the fabrication results of polishing off-axis aspheric, a novel method to optimize the tool-path is discussed in this paper. The optimizing method named weighted-iterative algorithm is according to the balance principle of the particle system. The power factor of each dwell point represents the requirement of dwell density. Considering the factors which influence the polishing result, the power factors cosist of three elements include constant, error distribution and dwell distance of workpiece edge. The tool-path is solved by numerical iterative method. In the end, an error data is simulated with actual parameters using the matrix-based algorithm with two different tool-paths. The one is X-Y uniform spacing model and the other one is to optimize it based on the first. The comparison shows that the results of the optimized one are much better than traditional one, especially the rms convergence rate. Theory of the algorithm is simple and exercisable, and it satisfies practical requirement as well.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Wei-jie Deng, Wei-jie Deng, Xue-jun Zhang, Xue-jun Zhang, Xiao-kun Wang, Xiao-kun Wang, Xu Wang, Xu Wang, } "Novel method for optimizing polishing tool-path in CCOS based on weighted-iterative algorithm", Proc. SPIE 7282, 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 728214 (20 May 2009); doi: 10.1117/12.830823; https://doi.org/10.1117/12.830823
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Theoretical analysis of stressed mirror polishing
Proceedings of SPIE (May 20 2009)
Optimization of removal function parameters in CCOS
Proceedings of SPIE (May 20 2009)
Rapid Fabrication Of Large Aspheric Optics
Proceedings of SPIE (February 20 1986)
A novel resistance iterative algorithm for CCOS
Proceedings of SPIE (August 30 2006)

Back to Top