Translator Disclaimer
Paper
21 May 2009 High brightness white LED driver with adaptive current control strategy
Author Affiliations +
Proceedings Volume 7282, 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies; 72822E (2009) https://doi.org/10.1117/12.830912
Event: AOMATT 2008 - 4th International Symposium on Advanced Optical Manufacturing, 2008, Chengdu, Chengdu, China
Abstract
A high efficiency and high brightness white LED driver with adaptive current control strategy in 0.5um CMOS process is presented in this paper. The current control mode is determined by output current level and input voltage value, switching between normal low drop-out (LDO) regulator and 2×charge-pump mode. The presented whiter LED driver is able to drive load current as large as 1.1A. The peak efficiency as high as 95% occurs at 220mA load current, with an output voltage ripple lower than 95mV at 1.1A output current can be achieved.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xin Liu, Shuxu Guo, Lifang Bian, Dong Qiao, Zhengxuan Wang, and Yuchun Chang "High brightness white LED driver with adaptive current control strategy", Proc. SPIE 7282, 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Advanced Optical Manufacturing Technologies, 72822E (21 May 2009); https://doi.org/10.1117/12.830912
PROCEEDINGS
6 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Piezoelectric energy harvester operating in flowing water
Proceedings of SPIE (April 12 2010)
A high linearity 14-bit pipelined charge summation ADC
Proceedings of SPIE (June 30 2005)
Special simulator to study metastability
Proceedings of SPIE (August 23 2000)
Portable laser rangefinder short-pulse measurements
Proceedings of SPIE (September 30 2003)
Tunable photoconductive switch-based microwave source
Proceedings of SPIE (January 04 1995)

Back to Top