Distortion measurement and calibration technology research of automatic observing and aiming optical system based on CCD

Xun Yu; Qian Li; Xiao-yan Shang; Liang Nie; Ji-an Wu

doi:10.1117/12.828656

20 May 2009 Distortion measurement and calibration technology research of automatic observing and aiming optical system based on CCD

Xun Yu, Qian Li, Xiao-yan Shang, Liang Nie, Ji-an Wu

Author Affiliations +

Proceedings Volume 7283, 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment; 728319 (2009) https://doi.org/10.1117/12.828656
Event: AOMATT 2008 - 4th International Symposium on Advanced Optical Manufacturing, 2008, Chengdu, Chengdu, China

Abstract

With the development of science and technology, especially advanced technology, the requirement to observing and aiming optical system is higher responsibility and accuracy, more intelligence, so wide-field and short-focal-length CCD camera system is used widely in the observing and aiming optical device, which is the important part of this device. But accurate calibration of forming-image system distortion is the key, and the distortion quantitative measurement must be finished. In this paper, firstly the high performance electronic target is established whose advantages are high contrast, high brightness, excellent uniformity and so on by use of TFT-LCD space optical modulator and visible image display technology. On basis of this, the distortion measurement system is formed to measure the automatic observing and aiming optical system based on CCD. Then polynomial model is established by applying the inversion algorithm and the measured distortion is calibrated by the least squares fit. The calibrated result shows that the measurement precision using the inversion polynomial algorithm is higher than that using the positive one obviously and the average distortion after calibration is better than 0.11%.

Citation Download Citation

Xun Yu, Qian Li, Xiao-yan Shang, Liang Nie, and Ji-an Wu "Distortion measurement and calibration technology research of automatic observing and aiming optical system based on CCD", Proc. SPIE 7283, 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment, 728319 (20 May 2009); https://doi.org/10.1117/12.828656

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available