Paper
20 May 2009 Research on optical measurement technology of optical multifilament basic parameters
Guohui Zhou, Jianhua Wang
Author Affiliations +
Abstract
The transverse section of optical multifilament is a six-sided cylinder, and the diameters of its circumcircle and excircle are the basic parameters. It is necessary that these parameters hold consistency. In this paper, the 2-D laser scanning technology is provided to measure these basic parameters of optical multifilament. To generate scanning beam with even palstance, DC moment motor is used to drive the eight-sided prism. The generated scanning beam is changed to constant velocity and parallel scanning beam by fθ lens. The parallel scanning beam passing through the measured optical multifilament is gathered onto the photoelectric conversion to make two edges of multifilament signal. By calculating the interval between two edge signals, the projection sizes on two orthogonality directions can be achieved, and then the diameters of circumcircle and excircle can be calculated. This paper provides the measuring mathematic model, analyzes the measuring error sources in detail and schedules the compensating tactics.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guohui Zhou and Jianhua Wang "Research on optical measurement technology of optical multifilament basic parameters", Proc. SPIE 7283, 4th International Symposium on Advanced Optical Manufacturing and Testing Technologies: Optical Test and Measurement Technology and Equipment, 72833W (20 May 2009); https://doi.org/10.1117/12.828794
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Prisms

Optical testing

Control systems

Error analysis

Laser scanners

Mirrors

Laser applications

Back to Top