30 March 2009 Lamb wave tuning curve calibration with improved PZT modeling
Author Affiliations +
Abstract
Guided waves generated and measured using surface-bonded Lead Zirconate Titanate (PZT) transducers have been widely used for structural health monitoring (SHM) and nondestructive testing (NDT) applications. For selective actuation and sensing of Lamb wave modes, the sizes of the transducers and the driving frequency of the input waveform should be tuned. For this purpose, a theoretical Lamb wave tuning curve (LWTC) of a specific transducer size is generally obtained. Here, the LWTC plots each Lamb wave mode' amplitude as a function of the driving frequency. However, a discrepancy between experimental and existing theoretical LWTCs has been observed due to little consideration of the bonding layer and the energy distribution between Lamb wave modes. In this study, calibration techniques for the theoretical LWTCs are proposed. First, a theoretical LWTC is developed when circular shape of PZTs is used for both Lamb wave excitation and sensing. Then, the LWTC is calibrated by estimating the effective PZT size with PZT admittance measurement. Finally, the energy distributions among symmetric and antisymmetric modes are taken into account for better prediction of the relative amplitudes between Lamb wave modes. The effectiveness of the proposed calibration techniques is examined through numerical simulations and experimental estimation of the LWTC using the circular PZT transducers instrumented on an aluminum plate.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Sang Jun Lee, Hoon Sohn, "Lamb wave tuning curve calibration with improved PZT modeling", Proc. SPIE 7292, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems 2009, 72920M (30 March 2009); doi: 10.1117/12.815585; https://doi.org/10.1117/12.815585
PROCEEDINGS
12 PAGES


SHARE
Back to Top