7 January 2009 The noise main characteristic for magnetic microsensors structures
Author Affiliations +
Proceedings Volume 7297, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies IV; 72972P (2009) https://doi.org/10.1117/12.823709
Event: Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies IV, 2008, Constanta, Romania
Abstract
The noise-signal at the output of a Hall magnetic sensor can be interpreted as a result of an equivalent magnetic induction, acting on a noiseless Hall device. In this paperwork based on the adequate models it is analysed the operating conditions, and are established the noise main characteristic for three magnetic microsensor structures, realized in the bipolar and the MOS integrated circuits technology. By using the numerical simulation the values of the signal-to-noise ratio and the noise-equivalent magnetic induction spectral density for different structure devices are compared and it is also emphasized the way in which choosing the geometry and the material features allows getting high-performance sensors. (properties influence on the device performances.)
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Cornel Panait, Cornel Panait, Vasile Sârbu, Vasile Sârbu, George Căruntu, George Căruntu, } "The noise main characteristic for magnetic microsensors structures", Proc. SPIE 7297, Advanced Topics in Optoelectronics, Microelectronics, and Nanotechnologies IV, 72972P (7 January 2009); doi: 10.1117/12.823709; https://doi.org/10.1117/12.823709
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Main noise characteristics for MOS Hall plates
Proceedings of SPIE (December 07 2010)
On the stability of MOS Hall devices
Proceedings of SPIE (January 07 2009)
Resolution capacity of Hall microsensors in MOS structures
Proceedings of SPIE (December 04 2010)
The detection limit of magnetic microsensors
Proceedings of SPIE (May 08 2007)

Back to Top