Paper
5 May 2009 Hybrid lidar radar receiver for underwater imaging applications
Author Affiliations +
Abstract
In this work, we present research performed to improve the receiver characteristics for underwater imaging applications using the hybrid lidar-radar detection technique. We report the development of the next-generation coherent heterodyne receiver using modulation of the optical receiver's amplifier gain. Significant advantages in the receiver specifications are achieved using a large-area, high gain, low-noise silicon avalanche photodiode (APD) as the photodetector cum frequency mixer-demodulator. We demonstrate that heterodyne detection by gain modulation of APD can be used to increase the signal-to-noise ratio, detection sensitivity and bandwidth for the hybrid receiver system.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Madhavi Seetamraju, Rajan Gurjar, Michael Squillante, and Jeffrey P. Derderian "Hybrid lidar radar receiver for underwater imaging applications", Proc. SPIE 7306, Optics and Photonics in Global Homeland Security V and Biometric Technology for Human Identification VI, 73061Q (5 May 2009); https://doi.org/10.1117/12.820246
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Modulation

Avalanche photodetectors

Signal to noise ratio

Heterodyning

Receivers

Amplifiers

Signal detection

Back to Top