Translator Disclaimer
18 May 2009 Micro force measurement by an optical method
Author Affiliations +
Abstract
We discuss the application of stress-induced changes in the crystal of a monolithic Nd:YAG laser as a possibility for micro force measurement. In fact, the application of an unknown force on the resonator-amplifier of a laser, formed by a transparent photo elastic material, can lead to a change of the laser frequency by as much as several gigahertz depending on the force intensity. In addition, the rates of change of the two orthogonally polarizations of the same mode with applied force are different. Hence, the strength of the applied force can be deduced from frequency measurement of the beat signal between the two polarizations of the oscillating mode or between the mode polarized in the orthogonal direction of the force and a reference frequency of a stabilized laser.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
N. Khélifa "Micro force measurement by an optical method", Proc. SPIE 7356, Optical Sensors 2009, 735621 (18 May 2009); https://doi.org/10.1117/12.820800
PROCEEDINGS
5 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

101W quasi continuous wave Nd YVO4 slab laser with high...
Proceedings of SPIE (November 17 2014)
Solar Pumped Nd:Cr:GSGG Laser
Proceedings of SPIE (July 04 1989)
LD side pumped Nd YAG Q switched laser without water...
Proceedings of SPIE (August 28 2009)
3.5-W output, diode-pumped Q-switched 532-nm laser
Proceedings of SPIE (August 15 1994)
Monolithic quasi-planar ring lasers
Proceedings of SPIE (August 06 1998)

Back to Top