Comparison between AlN thin films with different crystal orientations for MEMS applications

A. Ababneh; G. Marchand; H. Seidel; J. Hernando; J. L. Sánchez-Rojas; Ü. Sökmen; E. Peiner; U. Schmid

doi:10.1117/12.821858

18 May 2009 Comparison between AlN thin films with different crystal orientations for MEMS applications

A. Ababneh, G. Marchand, H. Seidel, J. Hernando, J. L. Sánchez-Rojas, Ü. Sökmen, E. Peiner, U. Schmid

Author Affiliations +

Proceedings Volume 7362, Smart Sensors, Actuators, and MEMS IV; 73621N (2009) https://doi.org/10.1117/12.821858
Event: SPIE Europe Microtechnologies for the New Millennium, 2009, Dresden, Germany

Abstract

Aluminium nitride (AlN) reactively sputter deposited from an aluminium target is an interesting compound material due to its CMOS compatible fabrication process and its piezoelectric properties. The crystal structure obtained during sputtering is a very importance criterion to obtain a good piezoelectric performance. To demonstrate this, we focused our investigations on two types of films. The first type shows a good c- axis orientation with round grain geometry. The second type is (101) oriented having a triangular grain shape. For measuring the out-of-plane displacements for dij determination, a MSV 400 Polytec scanning laser Doppler vibrometer was used. To obtain the piezoelectric constants d33 and d31 a fitting procedure between experimental and theoretical predicted results is used. Effective values for d33 and d31 in c-axis oriented films are about 3.0 pm/V and -1.0 pm/V, respectively. By contrast, films with (101) orientation show a lower effective longitudinal piezoelectric coefficients, consistent with this different orientation. Finally, both types of AlN layers were deposited on 640 μm long micro-cantilevers. The average displacement of the first mode on the vertical axis was about 12 nm for the film with good c -axis orientation and 0.3 nm for that with (101)- orientation when applying the same excitation.

Citation Download Citation

A. Ababneh, G. Marchand, H. Seidel, J. Hernando, J. L. Sánchez-Rojas, Ü. Sökmen, E. Peiner, and U. Schmid "Comparison between AlN thin films with different crystal orientations for MEMS applications", Proc. SPIE 7362, Smart Sensors, Actuators, and MEMS IV, 73621N (18 May 2009); https://doi.org/10.1117/12.821858

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE