Paper
25 August 2009 Photoplastic investigation on extrusion of flat-container with streamlined die
M. Q. Wang, Y. H. Liu, Q. K. Liu
Author Affiliations +
Proceedings Volume 7375, ICEM 2008: International Conference on Experimental Mechanics 2008; 737542 (2009) https://doi.org/10.1117/12.839277
Event: International Conference on Experimental Mechanics 2008 and Seventh Asian Conference on Experimental Mechanics, 2008, Nanjing, China
Abstract
This paper presents a photoplastic investigation on the extrusion of a flat extrusion container, which uses a streamlined die to produce the integral wall-plate. Polycarbonate with good strain-optical property is adopted as the extruded material. First, the isochromatic and isoclinic fringe patterns of the extruded polycarbonate model are taken, secondly, the plastic strains of the symmetric plane of the model are acquired by a hybrid method consisting of orthographic and oblique passing, then, the stresses of the symmetric plane are analyzed by the total theory of plasticity, at last, the extrusion pressure and the friction are obtained by the stresses of the points contacted to the container and the die. The distributions of the strains, the stresses, the extrusion pressure, and the friction obtained by the experiment provide references for numerical simulations and optimized design of the flat extrusion container.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Q. Wang, Y. H. Liu, and Q. K. Liu "Photoplastic investigation on extrusion of flat-container with streamlined die", Proc. SPIE 7375, ICEM 2008: International Conference on Experimental Mechanics 2008, 737542 (25 August 2009); https://doi.org/10.1117/12.839277
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Fringe analysis

3D modeling

Numerical simulations

Aluminum

Instrument modeling

Roads

Civil engineering

Back to Top