Translator Disclaimer
25 August 2009 Phase-shifting moiré interferometry for residual strain measurement
Author Affiliations +
Proceedings Volume 7375, ICEM 2008: International Conference on Experimental Mechanics 2008; 737546 (2009) https://doi.org/10.1117/12.839281
Event: International Conference on Experimental Mechanics 2008 and Seventh Asian Conference on Experimental Mechanics, 2008, Nanjing, China
Abstract
In this paper, a simple hole-drilling device was designed to improve hole-depth precision of the drilling. The precision of hole-depth at each step for drilling can be ensured at 0.01mm. Residual deformation around a hole of aluminum casting specimens was obtained by using a phase-shift Moiré interferometry method. Residual strain distribution with different hole-depth was calculated from the residual deformation and analyzed. According to the result of the experiment, the residual strain distribute around the hole is generally compressed under a special hole-depth. The compressed residual strain is reduced with the increase of the distance far away from the center of the hole. In addition, the compressed residual strain declines rapidly with the increase of the hole-depth.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jiangfan Zhou, Zhanwei Liu, Huimin Xie, and Keyu Li "Phase-shifting moiré interferometry for residual strain measurement", Proc. SPIE 7375, ICEM 2008: International Conference on Experimental Mechanics 2008, 737546 (25 August 2009); https://doi.org/10.1117/12.839281
PROCEEDINGS
6 PAGES


SHARE
Advertisement
Advertisement
Back to Top