11 May 2009 Improvement of EUVL mask blank inspection capability at Intel
Author Affiliations +
Proceedings Volume 7379, Photomask and Next-Generation Lithography Mask Technology XVI; 73790I (2009) https://doi.org/10.1117/12.824259
Event: Photomask and NGL Mask Technology XVI, 2009, Yokohama, Japan
Extreme ultraviolet lithography (EUVL) is a leading technology to succeed optical lithography for high volume production of 22 nm node and beyond. One of the top risks for EUVL is the readiness of defect-free masks, especially the availability of Mo/Si mask blanks with acceptable defect level. Fast, accurate and repeatable defect inspection of substrate and multi-layer (ML) blank is critical for process development by both blank suppliers and mask makers. In this paper we report the results of performance improvements on a latest generation mask blank inspection tool from Lasertec Corporation; the MAGICS M7360 at Intel Corporation's EUV Mask Pilot Line. Inspection repeatability and sensitivity for both quartz substrates (Qz) and ML blanks are measured and compared with the previous Phase I tool M7360. Preliminary results of high speed scan correction mirror implementation are also presented
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Andy Ma, Andy Ma, Ted Liang, Ted Liang, Seh-Jin Park, Seh-Jin Park, Guojing Zhang, Guojing Zhang, Tomoya Tamura, Tomoya Tamura, Kazunori Omata, Kazunori Omata, Yuta Sato, Yuta Sato, Hal Kusunose, Hal Kusunose, } "Improvement of EUVL mask blank inspection capability at Intel", Proc. SPIE 7379, Photomask and Next-Generation Lithography Mask Technology XVI, 73790I (11 May 2009); doi: 10.1117/12.824259; https://doi.org/10.1117/12.824259


Control of inspection for EUV substrates and mask blanks
Proceedings of SPIE (April 17 2013)
Inspecting EUV mask blanks with a 193nm system
Proceedings of SPIE (March 19 2010)
The effect of size and shape of sub 50 nm...
Proceedings of SPIE (October 29 2007)
Development status of EUVL mask blank and substrate
Proceedings of SPIE (October 13 2011)
EUV blank inspection
Proceedings of SPIE (May 01 2008)
Inspecting EUV mask blanks with a 193-nm system
Proceedings of SPIE (May 25 2010)

Back to Top