Paper
4 August 2009 The new null testing method for the special optical window
Changchun Huang
Author Affiliations +
Abstract
The high speed, high precision and wide range specifications are requirement for the modern aircraft, which the traditional hemispherical dome can't achieve now, and the novel conformal window instead can enhance the aerodynamic performance of the aircraft obviously. To reduce the aerodynamic drag and radar cross-section, the window geometry is generally aspheric in shape. As a result, the involved fabrication and testing processes are much more challenging than that of conventional optics and must be mastered before these windows and systems can be implemented at an acceptable cost and risk. Metrology is one of the critical areas required to advance the conformal window technology. But as the surface of these conformal windows is not the traditional sphere lens, the measurement method for it is infeasible with the conventional optics measurement processes. This paper we express the development of testing technology for the special conformal windows in brief, and emphatically introduces one available novel testing method- a new null testing, and here based on the theory of compensation methods, The principle of Offner's refractive null lens has been extended to test the transmission wavefront through conformal window optics and provide feedback during surface fabrication. a compensator system for the was designed for the conformal window is given which parameters are 100mm for its aperture and two parabolic surface as conformal window, the final residual wavefront error(RMS) of which is less than 1/20λ(λ=632.8nm).
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Changchun Huang "The new null testing method for the special optical window", Proc. SPIE 7383, International Symposium on Photoelectronic Detection and Imaging 2009: Advances in Infrared Imaging and Applications, 73831H (4 August 2009); https://doi.org/10.1117/12.836698
Lens.org Logo
CITATIONS
Cited by 2 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Testing and analysis

Aspheric lenses

Metrology

Aerodynamics

Wavefronts

Mirrors

Optical fabrication

RELATED CONTENT

Testing method of large-sized convex optical surfaces
Proceedings of SPIE (December 13 2018)
Design and fabrication of CGH for 600mm diameter SiC primary...
Proceedings of SPIE (September 27 2016)
Testing and analyzing conformal windows with null optics
Proceedings of SPIE (September 07 2001)
Distortion mapping correction in aspheric null testing
Proceedings of SPIE (August 11 2008)
Interferometry At The University Of Arizona
Proceedings of SPIE (March 23 1987)

Back to Top