4 August 2009 Design of dual energy x-ray detector for conveyor belt with steel wire ropes
Author Affiliations +
Abstract
A dual energy X-ray detector for conveyor belt with steel wire ropes is researched in the paper. Conveyor belt with steel wire ropes is one of primary transfer equipments in modern production. The traditional test methods like electromagnetic induction principle could not display inner image of steel wire ropes directly. So X-ray detection technology has used to detect the conveyor belt. However the image was not so clear by the interference of the rubber belt. Therefore, the dualenergy X-ray detection technology with subtraction method is developed to numerically remove the rubber belt from radiograph, thus improving the definition of the ropes image. The purpose of this research is to design a dual energy Xray detector that could make the operator easier to found the faulty of the belt. This detection system is composed of Xray source, detector controlled by FPGA chip, PC for running image processing system and so on. With the result of the simulating, this design really improved the capability of the staff to test the conveyor belt.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yue Dai, Changyun Miao, Feng Rong, "Design of dual energy x-ray detector for conveyor belt with steel wire ropes", Proc. SPIE 7385, International Symposium on Photoelectronic Detection and Imaging 2009: Terahertz and High Energy Radiation Detection Technologies and Applications, 738528 (4 August 2009); doi: 10.1117/12.835246; https://doi.org/10.1117/12.835246
PROCEEDINGS
7 PAGES


SHARE
RELATED CONTENT


Back to Top