21 August 2009 A parametric design study of an electrochemical sensor
Author Affiliations +
Proceedings Volume 7397, Biosensing II; 73970R (2009) https://doi.org/10.1117/12.825902
Event: SPIE NanoScience + Engineering, 2009, San Diego, California, United States
Abstract
Biological systems contain a multitude of molecules with specific functions and three-dimensional shapes that enable them to selectively interact with other molecules in a coordinated fashion. Engineering, on the other hand, has produced devices that operate on the micron-scale and that combine electronic and mechanical systems. Microelectromechanical Systems (MEMS) offer advantages such as the integration of a variety of functions into a single device (i.e. "lab-on-a-chip" platforms) and portability for "point-of-care" diagnostics. This study utilizes a microscale electrochemical sensor for detecting BoNT apatamer hybridization, in which we first used top-down lithographic processing to define the pattern of the electrodes and then used bottom-up manufacturing to modify the surface molecular properties for reducing non-specific binding. The goal was to systemically examine the effects of the design parameters of an electrochemical DNA sensor. Four key design parameters were examined: the area of the working electrode, the area of the counter electrode, the separation distance between the working and counter electrodes, and the overlap length between the working and counter electrodes. Through a log-log analysis of the current generated, representing the signal or noise, across variations of the different parameters, the significance of each parameter in sensor performance was determined. We found that the area of the working electrode was important in the performance optimization of the sensor, while the performance seemed to be independent of the other three parameters. The output signal level increased with the area of the working electrode and the signal-to-noise ratio was about constant in the tested range.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Daniel E. Garcia, Daniel E. Garcia, Ting-Hsuan Chen, Ting-Hsuan Chen, Fang Wei, Fang Wei, Chih-Ming Ho, Chih-Ming Ho, } "A parametric design study of an electrochemical sensor", Proc. SPIE 7397, Biosensing II, 73970R (21 August 2009); doi: 10.1117/12.825902; https://doi.org/10.1117/12.825902
PROCEEDINGS
12 PAGES


SHARE
Back to Top