20 August 2009 Synthesis and characterization of electrospun gallium nitride nanofibers
Author Affiliations +
Abstract
The simple and inexpensive technique of electrospinning was used for the production of long GaN nanofibers. The fibers were made using a precursor solution composed of pure Gallium Nitrate dissolved in dimethylacetamide (DMA) and a viscous solution of Cellulose acetate dissolved in a mixture of DMA and acetone. Using a tube furnace, they were sintered under a Nitrogen atmosphere to decompose the polymer and to reduce Oxygen contamination. This process was followed by sintering under a NH3 flow to complete the synthesis of wurtzite GaN. XRD, ESEM, and FTIR analysis were used to verify the chemical and structural composition of the samples. The I-V characteristics of a device constructed using a single GaN nanofiber showed the formation of ohmic contacts.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Anamaris Meléndez, Anamaris Meléndez, Kristle Morales, Kristle Morales, Idalia Ramos, Idalia Ramos, Eva Campo, Eva Campo, Jorge J. Santiago-Avilés, Jorge J. Santiago-Avilés, } "Synthesis and characterization of electrospun gallium nitride nanofibers", Proc. SPIE 7402, Nanoengineering: Fabrication, Properties, Optics, and Devices VI, 740210 (20 August 2009); doi: 10.1117/12.825368; https://doi.org/10.1117/12.825368
PROCEEDINGS
6 PAGES


SHARE
Back to Top