Translator Disclaimer
20 August 2009 Impact of moisture on PV module encapsulants
Author Affiliations +
Abstract
Water vapor is one of the major reasons for corrosion and aging within photovoltaic modules. We investigated different encapsulants for photovoltaic devices in respect of their water vapor transmission rate (WVTR), diffusion profile and saturation concentration for varied climatic conditions (temperature and relative air humidity). For measuring the WVTR a gravimetric testing procedure was used, the diffusion profile was detected by infrared-absorption-spectroscopy in the wavelength range of 1.7 μm to 2.9 μm. The tested materials are a fast-cure ethylene vinyl acetate (EVA fc), a poly vinyl butyral (PVB), a thermoplastic polyurethane (TPU), an ionomer (ION) and a thermoplastic silicone (TSI). It was ascertained that the thermoplastics foils (TPU and TSI) have the highest WVTR, the ionomer the lowest. The saturation concentration of PVB was the highest at all, followed by TPU and EVA. The silicone and the ionomer store practically no water.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Thomas Swonke and Richard Auer "Impact of moisture on PV module encapsulants", Proc. SPIE 7412, Reliability of Photovoltaic Cells, Modules, Components, and Systems II, 74120A (20 August 2009); https://doi.org/10.1117/12.825943
PROCEEDINGS
7 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Degradation of veteran Si modules in hot humid locations in...
Proceedings of SPIE (September 26 2016)
Qualification of polymeric components for use in PV modules
Proceedings of SPIE (September 21 2011)
Infrared spectroscopy of antenna resonances
Proceedings of SPIE (September 02 2009)
Deposition and characterization of a-SiC:H thin films
Proceedings of SPIE (November 04 1994)
AIRS AMSU HSB on EOS Aqua first year post...
Proceedings of SPIE (November 10 2003)

Back to Top