20 August 2009 Study on the heat dissipation performance of different types of junction boxes
Author Affiliations +
Abstract
The heat dissipation performance of the junction boxes is directly related to the service life of solar modules. In this paper, the PT100 thermocouple and the MT2 infrared thermometer is used to conduct a preliminary study on the heat dissipation performance of different models of junction boxes. We selected three types of junction boxes from different manufacturers, and then produced a piece of laminating module without solar cells, using a piece of toughened glass which size is 1574*802*3.2mm, two-tier EVA film, and a sheet of TPT as the substrate. Junction boxes filled with silica gel A, silica gel B and no gel were fixed on the laminating module, which is a simple procedure on producing PV modules at present, and were evenly spread. All the junction boxes were connected in a series circuit. When every thing ready, we enforced respectively 5A and 8A DC current on the circuit for 5 hours apiece, and the environment temperature 25 °C was maintained. Simultaneously we tested the temperatures of the boxes inside and outside hourly. The investigation indicates that junction box filled silica gel shows better performance.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Fanjian Kong, Fanjian Kong, James Zhao, James Zhao, Jibo Cai, Jibo Cai, } "Study on the heat dissipation performance of different types of junction boxes", Proc. SPIE 7412, Reliability of Photovoltaic Cells, Modules, Components, and Systems II, 74120H (20 August 2009); doi: 10.1117/12.825719; https://doi.org/10.1117/12.825719
PROCEEDINGS
9 PAGES


SHARE
RELATED CONTENT

Photovoltaic efficiency measurements
Proceedings of SPIE (November 02 2004)
Fire hazard and other safety concerns of PV systems
Proceedings of SPIE (September 21 2011)
Reliability Of Photovoltaic Modules
Proceedings of SPIE (November 19 1986)
Thermal modeling for rooftop CPV system
Proceedings of SPIE (September 08 2008)

Back to Top