Paper
21 August 2009 Development of a large ion beam figuring facility for correction of optics up to 1.7 m diameter
M. Ghigo, S. Cornelli, R. Canestrari, D. Garegnani
Author Affiliations +
Abstract
In the INAF-Astronomical Observatory of Brera (INAF-OAB) a new Ion Beam Figuring Facility, that adds to the previous one, is under advanced construction. The present facility is able to figure optics up to 50 cm in diameter meanwhile the new one is larger and will be able to figure optics up to 1.7 meter. It will employ a Kaufman Ion Source having three degrees of freedom (x-y-z) with step motors and encoders. The source will have two different grid sizes so to be able to figure the optics wit a broad or small removal function depending from the application. The control system will be computer controlled and designed to be autonomous and self-monitoring during the figuring by using a proprietary process control software. This software will use a time matrix map indicating the dwell times required for each pixel of the optical surface. The software and the mathematical tools used to compute the Time Matrix solution has been developed in INAF-OAB as well.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
M. Ghigo, S. Cornelli, R. Canestrari, and D. Garegnani "Development of a large ion beam figuring facility for correction of optics up to 1.7 m diameter", Proc. SPIE 7426, Optical Manufacturing and Testing VIII, 742611 (21 August 2009); https://doi.org/10.1117/12.826433
Lens.org Logo
CITATIONS
Cited by 6 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Ions

Ion beams

Optics manufacturing

Ion beam finishing

Head

Process control

Argon

RELATED CONTENT

Wavefront improvement by IBF-processed correction surfaces
Proceedings of SPIE (November 15 2019)
High Current Implantation Systems For CMOS
Proceedings of SPIE (April 09 1985)
Pilot study for ion beam figuring process
Proceedings of SPIE (October 06 2010)

Back to Top