21 August 2009 An optical switch of natural light guiding system based on cubic structure with fresnel surface
Author Affiliations +
Recently, many researches focus on illumination with sunlight for saving energy and healthy lighting. A Natural Light Guiding System has collecting, transmitting, and lighting parts. In most systems, the paths on transmitting part are fixed so the collected sunlight of the Natural Light Guiding System can not be free managed and is sometime wasted. In this paper, we design an optical switch to change the path of the collected sunlight on the transmitting sunlight. The switch is cubic structure that includes a 45 degree mirror for reflecting sunlight. According to the structure of the optical switch, we can rotate the switch to manage the path of the collected sunlight. When the path is parallel with the mirror, the sunlight will pass through the switch; and when the included angle between the path and mirror is 45 degree, we can change the path of light. For coupling the exit beam into lightpipe, we design the surfaces of cubic structure to be aspheric surface with Fresnel surface. Finally, we simulate the efficiency of the optical switch when the path is changed by the mirror.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kao-Hsu Chou, Kao-Hsu Chou, Yi-Yung Chen, Yi-Yung Chen, Allen Jong-Woei Whang, Allen Jong-Woei Whang, } "An optical switch of natural light guiding system based on cubic structure with fresnel surface", Proc. SPIE 7428, Current Developments in Lens Design and Optical Engineering X, 74280O (21 August 2009); doi: 10.1117/12.825266; https://doi.org/10.1117/12.825266


Improved method for transfer of FEA results to optical codes
Proceedings of SPIE (November 05 2003)
Modeling of optical mirror and electromechanical behavior
Proceedings of SPIE (October 17 2001)
Microelectromechanical optical switch
Proceedings of SPIE (January 20 2003)
Development of a new 1x4 micro-optical switch
Proceedings of SPIE (April 18 2002)
Design-geometry-specific surface profiles
Proceedings of SPIE (December 07 1998)

Back to Top