Preliminary design of the International X-ray Observatory flight mirror assembly

Ryan S. McClelland; Timoth M. Carnahan; Michael K. Choi; David W. Robinson; Timo T. Saha

doi:10.1117/12.825364

31 August 2009 Preliminary design of the International X-ray Observatory flight mirror assembly

Ryan S. McClelland, Timoth M. Carnahan, Michael K. Choi, David W. Robinson, Timo T. Saha

Proceedings Volume 7437, Optics for EUV, X-Ray, and Gamma-Ray Astronomy IV; 74370A (2009) https://doi.org/10.1117/12.825364
Event: SPIE Optical Engineering + Applications, 2009, San Diego, California, United States

Abstract

The Flight Mirror Assembly (FMA) preliminary mechanical design for NASA's next major X-ray telescope mission, the International X-Ray Observatory (IXO), has been developed at NASA Goddard Space Flight Center (GSFC). The design addresses some unique engineering challenges presented by the unprecedented combination of high angular resolution and large effective area required to achieve the desired scientific objectives. To meet these requirements, the Wolter-I Soft X-Ray Telescope (SXT) optical design consists of about 14,000 0.4 mm thick glass mirror segments densely packed into a 3.4 m diameter FMA and supported with micron level accuracy and stability. Key engineering challenges addressed include ensuring positive stress margins for the glass segments with a high Factor of Safety, keeping the structure light enough to launch, providing a large effective area, and preventing unacceptable thermal distortion. Standard mechanical design techniques such as FEM modeling and optimization, integrated optomechanical analysis, and development testing were applied to this unique problem. The thin mirror segments are mounted into 60 intermediate wedge shaped structures called modules. Modules are kinematically mounted to the FMA primary structure which is optimized for minimum mass and obscuration of the clear aperture. The preliminary design demonstrates the feasibility of building and launching a large space-based SXT using slumped glass mirrors which meets the IXO effective area, mass, structural, and thermal requirements.

Citation Download Citation

Ryan S. McClelland, Timoth M. Carnahan, Michael K. Choi, David W. Robinson, and Timo T. Saha "Preliminary design of the International X-ray Observatory flight mirror assembly", Proc. SPIE 7437, Optics for EUV, X-Ray, and Gamma-Ray Astronomy IV, 74370A (31 August 2009); https://doi.org/10.1117/12.825364

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available