31 August 2009 Production of silicon mirror plates
Author Affiliations +
Silicon pore optics are currently under development for missions such as the International X-ray Observatory (IXO) as an alternative to the glass or nickel shell mirrors that were used in previous generation X-ray telescopes. The unprecedented effective area requirement of the IXO requires a modular optics design suitable for mass production. In this paper we discuss the current state-of-the-art in plate manufacturing technology. We provide examples of process innovations that have directly impacted the cost per mirror plate and have reduced the manufacturing cost of a mirror module. We show how a switch from silicon to silica as the reflective surface results in a simplified process flow without a corresponding change in the optical performance. We demonstrate how standard photolithographic techniques, applied in the semiconductor industry, can be used to pattern a reflective layer. The 5 arc-second angular resolution requirement of the IXO has stimulated a theoretical analysis of engineering tolerances in relation to angular resolution. We prove that improved control of the wedge angle by means of etch rate monitoring results in improved angular resolution. The results of this investigation will be used as the basis for future development in design for mass production.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Marinus B. Olde Riekerink, Bob Lansdorp, Lennart J. de Vreede, Marko T. Blom, Ronny van't Oever, Marcelo D. Ackermann, Maximilien J. Collon, Kotska Wallace, Marcos Bavdaz, "Production of silicon mirror plates", Proc. SPIE 7437, Optics for EUV, X-Ray, and Gamma-Ray Astronomy IV, 74370U (31 August 2009); doi: 10.1117/12.825960; https://doi.org/10.1117/12.825960


Making the ATHENA optics using silicon pore optics
Proceedings of SPIE (July 24 2014)
New lithographic techniques for x-ray spectroscopy
Proceedings of SPIE (July 27 2016)
Silicon pore optics for the international x-ray observatory
Proceedings of SPIE (November 20 2017)
W/C multilayers deposited on plastic films
Proceedings of SPIE (January 21 1993)
Optical design of the x-ray telescope for XEUS
Proceedings of SPIE (September 08 2005)

Back to Top