31 August 2009 Performance prediction and measurement of silicon pore optics
Author Affiliations +
Abstract
We present the latest results of X-ray metrology performed on Silicon Pore Optics, a novel type of lightweight X-ray optics made from silicon and developed for future, large area space based X-ray telescopes. From these so-called pencil beam measurements, performed at the PTB laboratory of the BESSY synchrotron radiation facility, the overall performance in terms of half energy width (HEW) of the optics has been calculated. All measurements are performed at an intrafocal distance, but due to the nature of this measurement method, the results in terms of HEW can be extrapolated to the focal plane. In the near future, upgrades of the X-ray facilities will allow measuring the performance of the optics in the actual focal plane. We also present the newest development of our X-ray tracer tool, which is used to retrieve performance and imaging prediction from single plate level up to a full optic by use of the mirror figure, as recorded during the fabrication process. We furthermore present results of AFM imaging and X-ray reflectivity measurements performed to determine the surface roughness of the base material (polished Si wafers) and of fully processed and coated mirror plates.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Marcelo D. Ackermann, Marcelo D. Ackermann, Maximilien J. Collon, Maximilien J. Collon, Ramses Guenther, Ramses Guenther, Rakesh Partapsing, Rakesh Partapsing, Giuseppe Vacanti, Giuseppe Vacanti, Ernst-Jan Buis, Ernst-Jan Buis, Michael Krumrey, Michael Krumrey, Peter Müller, Peter Müller, Marco W. Beijersbergen, Marco W. Beijersbergen, Marcos Bavdaz, Marcos Bavdaz, Kotska Wallace, Kotska Wallace, } "Performance prediction and measurement of silicon pore optics", Proc. SPIE 7437, Optics for EUV, X-Ray, and Gamma-Ray Astronomy IV, 74371N (31 August 2009); doi: 10.1117/12.826840; https://doi.org/10.1117/12.826840
PROCEEDINGS
10 PAGES


SHARE
RELATED CONTENT

Hybrid x-ray optical system for space astrophysics
Proceedings of SPIE (May 02 2013)
Prototyping iridium coated mirrors for x-ray astronomy
Proceedings of SPIE (May 30 2017)
R&D of the hard x ray focusing elements for the...
Proceedings of SPIE (November 21 1996)
The effect of surface residual stress on the performance of...
Proceedings of SPIE (September 28 2011)
Performance of silicon pore optics
Proceedings of SPIE (July 14 2008)
Research and development of MEMS x-ray optics
Proceedings of SPIE (September 07 2005)

Back to Top