Calibrating IR optical densities for the Gemini Planet Imager extreme adaptive optics coronagraph apodizers

Anand Sivaramakrishnan; Rémi Soummer; G. Lawrence Carr; Christophe Dorrer; Allen Bolognesi; Neil Zimmerman; Ben R. Oppenheimer; Robin Roberts; Alexandra Greenbaum

doi:10.1117/12.826955

19 August 2009 Calibrating IR optical densities for the Gemini Planet Imager extreme adaptive optics coronagraph apodizers

Anand Sivaramakrishnan, Rémi Soummer, G. Lawrence Carr, Christophe Dorrer, Allen Bolognesi, Neil Zimmerman, Ben R. Oppenheimer, Robin Roberts, Alexandra Greenbaum

Author Affiliations +

Proceedings Volume 7440, Techniques and Instrumentation for Detection of Exoplanets IV; 74401C (2009) https://doi.org/10.1117/12.826955
Event: SPIE Optical Engineering + Applications, 2009, San Diego, California, United States

Abstract

High contrast imaging sometimes uses apodized masks in coronagraphs to suppress diffracted starlight from a bright source in order to observe its environs. Continuously graded opacity material and metallic half-tone dots are two possible apodizers fabrication techniques. In the latter approach if dot sizes are comparable to the wavelength of the light, surface plasmon effects can complicate the optical density (OD) vs. superficial dot density relation. OD can also be a complicated function of wavelength. We measured half-tone microdot screens' and continuous materials' transmissions. Our set-up replicated the f/ 64 optical configuration of the Gemini Planet Imager's Apodized Pupil Lyot Coronagraph pupil plane, where we plan to place our pupil plane masks. Our half-tone samples were fabricated with 2, 5, and 10 micron dot sizes, our continuous greyscale was High Energy Electron Beam Sensitive (HEBS) glass (Canyon Materials Inc.). We present optical density (OD) vs. wavelength curves for our half-tone and continuous greyscale samples 1.1 - 2.5 μm wavelength range. Direct measurements of the beam intensity in the far field using a Fourier Transform Infrared Spectrograph on Beamline U4IR at Brookhaven National Laboratory's National Synchrotron Light Source (NSLS) provided transmission spectra of test patches and apodizers. We report the on-axis IR transmission spectra through screens composed of metallic dots that are comparable in size with the wavelength of the light used, over a range of optical densities. We also measured departures from simple theory describing the array of satellite spots created by thin periodic grids in the pupil of the system. Such spots are used for photometry and astrometry in coronagraphic situations. Our results pertain to both ground and space based coronagraphs that use spatially variable attenuation, typically in focal plane or pupil plane masks.

Citation Download Citation

Anand Sivaramakrishnan, Rémi Soummer, G. Lawrence Carr, Christophe Dorrer, Allen Bolognesi, Neil Zimmerman, Ben R. Oppenheimer, Robin Roberts, and Alexandra Greenbaum "Calibrating IR optical densities for the Gemini Planet Imager extreme adaptive optics coronagraph apodizers", Proc. SPIE 7440, Techniques and Instrumentation for Detection of Exoplanets IV, 74401C (19 August 2009); https://doi.org/10.1117/12.826955

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE

Includes PDF, HTML & Video, when available