Translator Disclaimer
20 April 1987 Design Of A Long Trace Surface Profiler
Author Affiliations +
Proceedings Volume 0749, Metrology: Figure and Finish; (1987) https://doi.org/10.1117/12.939842
Event: OE LASE'87 and EO Imaging Symposium, 1987, Los Angeles, CA, United States
Abstract
The design of a long-trace surface profiler for the non-contact measurement of surface profile, slope error and curvature on cylindrical synchrotron radiation (SR) mirror is pre-sented here. The optical system is based upon the concept of a pencil-beam interferometer with an inherent large depth-of-field. The key feature of the optical system is the zero-path-difference beam splitter, which separates the laser beam into two colinear, variable-separation probe beams. A linear array detector is used to record the interference fringe in the image, and analysis of the fringe location as a function of scan position allows one to reconstruct the surface profile. The optical head is mounted on an air bearing slide with the capability to measure 38" long aspheric optics, typical of those encountered in SR applications. A novel feature of the optical system is the use of a transverse "outrigger" beam which provides information on the relative alignment of the scan axis to the cylinder optic symmetry axis.
© (1987) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Peter Z. Takacs, Shi-nan Qian, and Jeffrey Colbert "Design Of A Long Trace Surface Profiler", Proc. SPIE 0749, Metrology: Figure and Finish, (20 April 1987); https://doi.org/10.1117/12.939842
PROCEEDINGS
6 PAGES


SHARE
Advertisement
Advertisement
Back to Top