10 July 2009 A CMOS low-power voltage control oscillator applied in the GPS RF receiver
Author Affiliations +
Proceedings Volume 7491, PIAGENG 2009: Remote Sensing and Geoscience for Agricultural Engineering; 74910P (2009) https://doi.org/10.1117/12.837213
Event: International Conference on Photonics and Image in Agriculture Engineering (PIAGENG 2009), 2009, Zhangjiajie, China
Abstract
The VCO circuit is widely applied in various communication circuits. This paper describes a low power ring voltage control oscillator. The VCO consists of five stages, and each stage uses differential structure. The VCO is the single-ended output. The chip is fabricated in 0.18μm CMOS technology of TSMC in Taiwan. The chip core area is 0.25mm × 0.05mm. Measurements show that the power consumption is about 9.2mW at a supply voltage of 1.75V. The center frequency is 62MHz. The phase noise is -89.39dBc/Hz@1MHz. The VCO can be used in PLL of the GPS RF receiver.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhi-min Cai, Xiao-fang Chen, "A CMOS low-power voltage control oscillator applied in the GPS RF receiver", Proc. SPIE 7491, PIAGENG 2009: Remote Sensing and Geoscience for Agricultural Engineering, 74910P (10 July 2009); doi: 10.1117/12.837213; https://doi.org/10.1117/12.837213
PROCEEDINGS
6 PAGES


SHARE
Back to Top