Translator Disclaimer
20 October 2009 Multifunctional properties of multi-wall carbon nanotubes/cyanate-ester nanocomposites and CFRPs
Author Affiliations +
Proceedings Volume 7493, Second International Conference on Smart Materials and Nanotechnology in Engineering; 74932G (2009) https://doi.org/10.1117/12.845657
Event: Second International Conference on Smart Materials and Nanotechnology in Engineering, 2009, Weihai, China
Abstract
The incorporation of multi-wall carbon nanotubes at weight fractions of 0.5% wt. and 1% wt. in a PRIMASET cyanate ester system (PT-30) was examined. The thermo-mechanical and electrical properties of the developed nanopolymers were investigated and were compared with the neat matrix properties. A preparation method was developed for the incorporation of the fillers in the resin system. The phenomenon of re-agglomeration of nanotubes took place in the first stages of curing schedule but nevertheless according to the SEM images a good dispersion was generally achieved. DSC, DMA, TGA and thermal conductivity tests were performed for the thermal characterization. For the electrical characterization, AC and DC measurements took place. No significant change in the glass transition temperature (Tg), thermal conductivity and mass loss values was observed in comparison with the neat resin systems. However, in both cases the improvement of electrical conductivity was about nine orders of magnitude, indicating that percolation had been achieved. The elastic modulus in bending was examined and a slight increase was observed in direct comparison with the neat resin. Finally, the developed doped nanopolymer was used as matrix for the CFRPs manufacturing. A full manufacturing protocol was developed in order to overcome the challenging issues concerning the cyanate esters' handling and manufacturing processes. Moreover AC and DC measurements were performed along with thermal conductivity measurements and TMA. The produced modified composites were tested for short beam strength.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
A. Baltopoulos, E. Fiamegkou, A. Vavouliotis, P. Karapappas, N. Athanasopoulos, I. Fotiou, V. Kostopoulos, P. D. Maagt, and T. Rohr "Multifunctional properties of multi-wall carbon nanotubes/cyanate-ester nanocomposites and CFRPs", Proc. SPIE 7493, Second International Conference on Smart Materials and Nanotechnology in Engineering, 74932G (20 October 2009); https://doi.org/10.1117/12.845657
PROCEEDINGS
10 PAGES


SHARE
Advertisement
Advertisement
Back to Top