20 October 2009 Analysis of impact-sliding wear property of aluminum bronze against titanium alloy and 2Cr13 steel
Author Affiliations +
Proceedings Volume 7493, Second International Conference on Smart Materials and Nanotechnology in Engineering; 74932W (2009) https://doi.org/10.1117/12.845245
Event: Second International Conference on Smart Materials and Nanotechnology in Engineering, 2009, Weihai, China
Abstract
Impact-sliding wear of aluminum bronze against titanium alloy and 2Cr13 steel have been conducted using impactsliding wear test rig which was developed independently. Some non-destructive examinations have been performed on worn specimens, using weighing, 2D and 3D profilometry, scanning electron microscopy and EDS technology. Using laser scanning confocal microscope (LSCM), it has been found that the surface of aluminum bronze which wears against titanium alloy is much coarser than the surface which wears against 2Cr13 steel. Results of wear volume show clearly that although the hardness of titanium alloy has greater value than aluminum bronze, the wear volume of titanium alloy has much greater value compared with aluminum bronze. It has been found that there is remarkable material transferring from titanium alloy to aluminum bronze and little material transfer from aluminum bronze to titanium alloy. For the impact-sliding wear between aluminum bronze against 2Cr13 steel, the hardness of aluminum bronze has greater value than 2Cr13 steel, the wear volume of aluminum bronze has much greater value compared with 2Cr13 steel, whose wear volume can be ignored. Using EDS technology, it has been found that there is material transferring from aluminum bronze to 2Cr13 steel and material transferring from 2Cr13 steel to aluminum bronze can be ignored. Through the SEM pictures of worn surfaces and worn debris, flaking, particles and micro-cracks can be found on the worn surfaces. The wear mechanism of aluminum bronze against titanium alloy and 2Cr13 steel is delamination wear.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yongqiang Wei, Liqin Wang, "Analysis of impact-sliding wear property of aluminum bronze against titanium alloy and 2Cr13 steel", Proc. SPIE 7493, Second International Conference on Smart Materials and Nanotechnology in Engineering, 74932W (20 October 2009); doi: 10.1117/12.845245; https://doi.org/10.1117/12.845245
PROCEEDINGS
8 PAGES


SHARE
Back to Top