Paper
20 October 2009 Upconversion emission of Er3+/Yb3+-codoped silicate glass micro-particle under high excitation intensity
Jiyou Wang, Nanzheng Li, Lipu Wang, Ping Duan
Author Affiliations +
Proceedings Volume 7493, Second International Conference on Smart Materials and Nanotechnology in Engineering; 74934R (2009) https://doi.org/10.1117/12.833674
Event: Second International Conference on Smart Materials and Nanotechnology in Engineering, 2009, Weihai, China
Abstract
The silicate glass micro-particles of co-doped with Er3+ and Yb3+ were prepared by a combustion process and characterized from the spectroscopic point of view, with the aim of investigating the effect and mechanisms of upconversion emissions. The upconversion emissions at 522nm and 547nm have been obtained by exciting the silicate glass micro-particle [about 30μm in diameter] under 976nm diode laser excitation. The excitation intensity was up to about 1800W/cm2. It was observed that the intensity ratio of the 522-nm emission to the 547-nm emission (I522nm/I547nm) in silicate glass increased when increasing the excitation intensity. I522nm became larger than I547nm when the excitation intensity was above 300W/cm2. It is proposed that the phenomenon resulted from the rise of the temperature of the sample measured.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Jiyou Wang, Nanzheng Li, Lipu Wang, and Ping Duan "Upconversion emission of Er3+/Yb3+-codoped silicate glass micro-particle under high excitation intensity", Proc. SPIE 7493, Second International Conference on Smart Materials and Nanotechnology in Engineering, 74934R (20 October 2009); https://doi.org/10.1117/12.833674
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Upconversion

Silicate glass

Ions

Erbium

Fiber lasers

Glasses

Oxides

Back to Top