3 December 2009 Modes in a long period grating fabricated on dispersion shifted fiber
Author Affiliations +
Proceedings Volume 7499, Seventh Symposium Optics in Industry; 749919 (2009) https://doi.org/10.1117/12.847115
Event: Seventh Symposium on Optics in Industry, 2009, Guadalajara, Jalisco, Mexico
Abstract
In this work we present the modal study of a dispersion shifted fiber (4 layers) and also in a fabricated long period grating in the same fiber type using the RSoft Software ®. For the grating analysis, the refraction index and the diameters were varied to simulate the changes due to the diameter increment provided by the electrical arc discharges effect. The structural optical fiber change, due to the periodic fattening induced by the electric arc, is added to the grating analysis as a sinusoidal type variation in each optical fiber layer. Several wavelengths are considered for the analysis and some of them are the ones commonly used by operational lasers and diodes launched in optical fibers. Results depicted the existence of many excited light modes when working with a wide spectrum white light source. When these modes satisfy the phase matching condition, they will couple in the LPFG providing it of particular filtering characteristics because of the fiber type and technique (fattening) of fabrication.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Julissa A. Estrada-Ramírez, Ruth I. Mata-Chávez, Alejandro Martínez-Rios, Julian M. Estudillo-Ayala, Roberto Rojas-Laguna, Everardo Vargas-Rodríguez, Edgar Alvarado-Méndez, J. Amparo Andrade-Lucio, "Modes in a long period grating fabricated on dispersion shifted fiber", Proc. SPIE 7499, Seventh Symposium Optics in Industry, 749919 (3 December 2009); doi: 10.1117/12.847115; https://doi.org/10.1117/12.847115
PROCEEDINGS
6 PAGES


SHARE
Back to Top