4 February 2010 The locating ways of laying pipe manipulator
Author Affiliations +
Proceedings Volume 7500, ICMIT 2009: Mechatronics and Information Technology; 75000R (2010) https://doi.org/10.1117/12.858445
Event: ICMIT 2009: Mechatronics and Information Technology, 2009, Gwangju, Korea, Republic of
Abstract
The laying pipe manipulator is a new equipment to lay concrete pipe. This kind of manipulator makes the work of laying pipes mechanized and automated. We report here a new laying pipe manipulator. The manipulator has 5 free degrees, and is driven by the hydraulic system. In the paper, one critical question of manipulator is studied: the locating ways of the manipulator to lay concrete pipe. During the process of laying concrete pipe, how to locate the manipulator is realized by the locating system of manipulator. The locating system consists of photoelectric target, laser producer, and computer. According to different construction condition, one or two or three photoelectric targets can be used. During the process of laying concrete pipe, if the interface of pipes are jointed together, and the other segment of pipe deviates from the pipe way, one target can be used, if the angle that the manipulator rotates around the holding pipe's axes is 0°, two targets can be used, three targets can be used at any site. In the paper, according to each locating way, the theory analysis is done. And the mathematical models of the manipulator moving from original position to goal position are obtained by different locating way. And the locating experiment was done. According to the experiment result, the work principle and mathematical models of different locating way was turned out to be well adopted for requirement, the mathematical model of different locating way supplies the basic control theory for the manipulator to lay and joint concrete pipe automatically.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Dan Wang, Dan Wang, Bin Li, Bin Li, DongLiang Lei, DongLiang Lei, } "The locating ways of laying pipe manipulator", Proc. SPIE 7500, ICMIT 2009: Mechatronics and Information Technology, 75000R (4 February 2010); doi: 10.1117/12.858445; https://doi.org/10.1117/12.858445
PROCEEDINGS
7 PAGES


SHARE
Back to Top