Translator Disclaimer
20 November 2009 Analysis and modeling of thermal failure based on a MEMS thermally driven structure
Author Affiliations +
Proceedings Volume 7510, 2009 International Conference on Optical Instruments and Technology: MEMS/NEMS Technology and Applications; 75100L (2009) https://doi.org/10.1117/12.845904
Event: International Conference on Optical Instrumentation and Technology, 2009, Shanghai, China
Abstract
This paper presents an analysis of the thermal failure model of a MEMS thermal driven structure fabricated by MetalMump process. The finite element analysis was used to study the thermal electrical model and the experimental test results were compared with the simulated results. The parameters of the driven current applied on the structure which influence the system stability were considered, including the current value as well as the frequency. Avoiding thermal aggregation leading to structure destruction, the geometry factors of the structure design were also discussed to improve the heat conduction effect.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Xiuhan Li, Quan Yuan, Leijie Lang, Jian Liu, Yu Liu, Dongming Fang, and Haixia Zhang "Analysis and modeling of thermal failure based on a MEMS thermally driven structure", Proc. SPIE 7510, 2009 International Conference on Optical Instruments and Technology: MEMS/NEMS Technology and Applications, 75100L (20 November 2009); https://doi.org/10.1117/12.845904
PROCEEDINGS
8 PAGES


SHARE
Advertisement
Advertisement
RELATED CONTENT

Microvalve for SMA-based CHAD
Proceedings of SPIE (July 21 2003)
Design considerations for large MEMS
Proceedings of SPIE (May 25 1995)
Silicon as material for mechanical wristwatches
Proceedings of SPIE (April 18 2002)
A novel suspended gate MOSFET pressure sensor
Proceedings of SPIE (June 30 2005)

Back to Top