Paper
23 October 2009 Fabrication and properties of Nd(Tb,Dy)Co/Cr films with perpendicular magnetic anisotropy
Weiming Cheng, Xiangshui Miao, Junbing Yan, Xiaomin Cheng
Author Affiliations +
Abstract
Light rare earth-heavy rare earth-transition metal films (LRE-HRE-TM)have large saturation magnetization (Ms) and are the promising media for hybrid recording. In this paper, Nd(Tb,Dy)Co/Cr films with perpendicular magnetic anisotropy were successfully fabricated onto glass substrate by RF magnetron sputtering and the effects of sputtering technology parameters and Nd substitution for HRE atoms on the magnetic properties were investigated. It was found that when the sputtering power and sputtering time are 250W and 4min, respectively, the magnetic properties of Nd(Tb,Dy)Co/Cr films obtain optimization, perpendicular coercivity, Ms and remanence square ratio(S) of NdTbCo/Cr film reach 3.8kOe, 247emu/cm3 and 0.801, respectively. With the increasing of Nd concentration, Ms increases, while the coercivity (Hc)and the temperature stability of magnetic properties decrease distinctly. These results can be explained by the ferri-magnetic structure of the RE-TM alloy.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Weiming Cheng, Xiangshui Miao, Junbing Yan, and Xiaomin Cheng "Fabrication and properties of Nd(Tb,Dy)Co/Cr films with perpendicular magnetic anisotropy", Proc. SPIE 7517, Photonics and Optoelectronics Meetings (POEM) 2009: Optical Storage and New Storage Technologies, 75170Y (23 October 2009); https://doi.org/10.1117/12.845978
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Sputter deposition

Magnetism

Neodymium

Terbium

Anisotropy

Chemical species

Chromium

Back to Top