Displacement and strain measurement of micro part using digital microscopy holographic interferometry

C. Sekiguchi; S. Yoneyama

doi:10.1117/12.851643

Translator Disclaimer

14 April 2010 Displacement and strain measurement of micro part using digital microscopy holographic interferometry

C. Sekiguchi, S. Yoneyama

Author Affiliations +

Proceedings Volume 7522, Fourth International Conference on Experimental Mechanics; 752255 (2010) https://doi.org/10.1117/12.851643
Event: Fourth International Conference on Experimental Mechanics, 2009, Singapore, Singapore

Abstract

A method for recording and reconstructing holograms of a small object using image plane digital holography for displacement and strain measurement is presented in the paper. The hologram of the magnified object is recorded using an imaging lens for the measurement of small area of the object. The optical setup for image plane digital holography is used for recording the hologram for the magnified measurement of the small area of the object. The magnified area of 120 × 90 μm² is obtained using phase-shifting digital holography with the microscope objective lens (MO). The resolution and the magnification obtained by single exposure digital holography are almost same with those obtained using phase-shifting digital holography. The results show that the magnified image of the small area can be reconstructed using the proposed method with the easy and simple optical setup.

Citation Download Citation

C. Sekiguchi and S. Yoneyama "Displacement and strain measurement of micro part using digital microscopy holographic interferometry", Proc. SPIE 7522, Fourth International Conference on Experimental Mechanics, 752255 (14 April 2010); https://doi.org/10.1117/12.851643

ACCESS THE FULL ARTICLE