14 April 2010 An analytical method on the surface residual stress for the cutting tool orientation
Author Affiliations +
Proceedings Volume 7522, Fourth International Conference on Experimental Mechanics; 75225K (2010) https://doi.org/10.1117/12.851589
Event: Fourth International Conference on Experimental Mechanics, 2009, Singapore, Singapore
Abstract
The residual stress is measured by choosing 8 kinds orientations on cutting the H13 dies steel on the HSM in the experiment of this paper. The measured data shows on that the residual stress exists periodicity for the different rake angle (β) and side rake angle (θ) parameters, further study find that the cutting tool orientations have closed relationship with the residual stresses, and for the original of the machined residual stress on the surface from the cutting force and the axial force, it can be gained the simply model of tool-workpiece force, using the model it can be deduced the residual stress model, which is feasible to calculate the size of residual stress. And for almost all the measured residual stresses are compressed stress, the compressed stress size and the direction could be confirmed by the input data for the H13 on HSM. As the result, the residual stress model is the key for optimization of rake angle (β) and side rake angle (θ) in theory, using the theory the more cutting mechanism can be expressed.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yueen Li, Yueen Li, Jun Zhao, Jun Zhao, Wei Wang, Wei Wang, } "An analytical method on the surface residual stress for the cutting tool orientation", Proc. SPIE 7522, Fourth International Conference on Experimental Mechanics, 75225K (14 April 2010); doi: 10.1117/12.851589; https://doi.org/10.1117/12.851589
PROCEEDINGS
9 PAGES


SHARE
Back to Top