14 April 2010 The effect to bending fatigue strength of 65 mn under torsion strain-hardening
Author Affiliations +
Proceedings Volume 7522, Fourth International Conference on Experimental Mechanics; 75225R (2010) https://doi.org/10.1117/12.851648
Event: Fourth International Conference on Experimental Mechanics, 2009, Singapore, Singapore
Abstract
Bending Fatigue experiments for 65Mn are carried out to study the effects of torsion strain-hardening. Firstly bending fatigue specimens are pre-twisted for torsion strain-hardening by using torsion testing machine. And specimens are divided as 8 groups and each group has 8 specimens. A series of plastic shear strains are applied to each group. Then bending fatigue experiments are carried on to estimate torsion fatigue strength by fatigue bending machine. Finally micrograms of fatigue damage are taken by stereo microscope. The test results showed that torsion strain-hardening has a certain effects that when torsion plastic strain is small, bending fatigue strength is increased. Oppositely, when torsion plastic strain is large, bending fatigue strength are all decreased in a large rate compared with specimens without torsion strain-hardening. Comparing different test results and corresponding paragraphs obtained from stereo microscope, a reasonable explanation can be deduced by using metal micromechanics theory and crystal lattice dislocation theory. A possible reason is that when torsion plastic strain is small, there will be more dislocation in crystal lattice, which can raise the fatigue strength. And when torsion plastic strain is large, dislocations are piled up in some position which can bring flaws under loads, which reduce the fatigue strength of specimen.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Guangping Zou, Guangping Zou, Qichao Xue, Qichao Xue, Wei Li, Wei Li, "The effect to bending fatigue strength of 65 mn under torsion strain-hardening", Proc. SPIE 7522, Fourth International Conference on Experimental Mechanics, 75225R (14 April 2010); doi: 10.1117/12.851648; https://doi.org/10.1117/12.851648
PROCEEDINGS
7 PAGES


SHARE
Back to Top