26 January 2010 Development of FOP-HARP imaging device
Author Affiliations +
Proceedings Volume 7536, Sensors, Cameras, and Systems for Industrial/Scientific Applications XI; 753604 (2010); doi: 10.1117/12.838424
Event: IS&T/SPIE Electronic Imaging, 2010, San Jose, California, United States
Abstract
The high-gain avalanche rushing amorphous photoconductor (HARP) camera tube achieves ultrahigh-sensitivity by using the avalanche multiplication. The applications of this tube extend beyond broadcasting into other fields. It is attracting a great deal of attention especially for radiation diagnosis, such as synchrotron radiation microangiography, because it can obtain high-resolution and high-contrast images with a low dose of radiation. However, in the present system, a fluorescent screen and the photoconductive film of the HARP tube are connected optically by a lens-coupling method, and low light throughput remains a big problem. To improve the light throughput by using a fiber-coupling method, we applied a fiber-optic plate (FOP) to the substrate of a HARP tube. The FOP consists of three types of glass that have differing hardnesses and elastic coefficients that make it difficult to flatten the FOP surface enough to form the HARP film. We thus introduced a new mechanical polishing method and succeeded in realizing avalanche multiplication in the FOP-HARP tube. The results of shooting experiments by applying the FOP-HARP to the microangiography showed that a spatial resolution of over 20 line pairs/mm was obtained. Moreover, rat femoral arteries of 150-200 μm in diameter could be visualized as motion pictures with a one-fourth lower concentration of contrast material than that needed for ordinary microangiography. Another potential application of the FOP-HARP is an ultrahigh-sensitivity nearinfrared (NIR) image sensor made by fiber-coupling with an image intensifier (I.I.). The image sensor provides highquality images and should be a powerful tool for NIR imaging.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Kazunori Miyakawa, Yuji Ohkawa, Tomoki Matsubara, Kenji Kikuchi, Siro Suzuki, Kenkichi Tanioka, Misao Kubota, Norifumi Egami, Takuji Atsumi, Shonosuke Matsushita, Taisuke Konishi, Yuzuru Sakakibara, Kazuyuki Hyodo, Yoshimasa Katori, Yoshiaki Okamoto, "Development of FOP-HARP imaging device", Proc. SPIE 7536, Sensors, Cameras, and Systems for Industrial/Scientific Applications XI, 753604 (26 January 2010); doi: 10.1117/12.838424; https://doi.org/10.1117/12.838424
PROCEEDINGS
8 PAGES


SHARE
KEYWORDS
Cameras

Glasses

Polishing

Synchrotron radiation

Near infrared

Imaging systems

Prototyping

Back to Top