31 December 2010 Optoelectronic system on the base of the anamorphic element for the measuring of the elevation angles
Author Affiliations +
Proceedings Volume 7544, Sixth International Symposium on Precision Engineering Measurements and Instrumentation; 75443N (2010); doi: 10.1117/12.885594
Event: Sixth International Symposium on Precision Engineering Measurements and Instrumentation, 2010, Hangzhou, China
Abstract
The researches in the millimetre wave range require the high accuracy for position of the mirror components. A mirror weight is the cause of the roll deformation of the elevation axle relatively the bearing. At result the elevation angle of a parabolic mirror axis orientation is not equal to the set values. For the measuring these roll angular deformations the new type of the anamorphic based system are used. The new method for roll angles measuring is developed. Optical scheme for the measurement system and anamorphic element is proposed. Equation for the static characteristic of the system and its graphical representation are shown.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Igor Konyakhin, Alexey Merson, Alexandr Timofeev, Alexey Konyakhin, "Optoelectronic system on the base of the anamorphic element for the measuring of the elevation angles", Proc. SPIE 7544, Sixth International Symposium on Precision Engineering Measurements and Instrumentation, 75443N (31 December 2010); doi: 10.1117/12.885594; https://doi.org/10.1117/12.885594
PROCEEDINGS
6 PAGES


SHARE
KEYWORDS
Mirrors

Optoelectronics

Computer simulations

Optical components

Radio optics

Receivers

Reflectors

Back to Top