Translator Disclaimer
Paper
28 December 2010 Theoretical and experimental research on machine tool servo system for ultra-precision position compensation on CNC lathe
Author Affiliations +
Proceedings Volume 7544, Sixth International Symposium on Precision Engineering Measurements and Instrumentation; 75446K (2010) https://doi.org/10.1117/12.885623
Event: Sixth International Symposium on Precision Engineering Measurements and Instrumentation, 2010, Hangzhou, China
Abstract
The theories and techniques for improving machining accuracy via position control of diamond tool's tip and raising resolution of cutting depth on precise CNC lathes have been extremely focused on. A new piezo-driven ultra-precision machine tool servo system is designed and tested to improve manufacturing accuracy of workpiece. The mathematical model of machine tool servo system is established and the finite element analysis is carried out on parallel plate flexure hinges. The output position of diamond tool's tip driven by the machine tool servo system is tested via a contact capacitive displacement sensor. Proportional, integral, derivative (PID) feedback is also implemented to accommodate and compensate dynamical change owing cutting forces as well as the inherent non-linearity factors of the piezoelectric stack during cutting process. By closed loop feedback controlling strategy, the tracking error is limited to 0.8 μm. Experimental results have shown the proposed machine tool servo system could provide a tool positioning resolution of 12 nm, which is much accurate than the inherent CNC resolution magnitude. The stepped shaft of aluminum specimen with a step increment of cutting depth of 1 μm is tested, and the obtained contour illustrates the displacement command output from controller is accurately and real-time reflected on the machined part.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Zhichao Ma, Leilei Hu, Hongwei Zhao, Boda Wu, Zhenxing Peng, Xiaoqin Zhou, Hongguo Zhang, Shuai Zhu, and Lifeng Xing "Theoretical and experimental research on machine tool servo system for ultra-precision position compensation on CNC lathe", Proc. SPIE 7544, Sixth International Symposium on Precision Engineering Measurements and Instrumentation, 75446K (28 December 2010); https://doi.org/10.1117/12.885623
PROCEEDINGS
7 PAGES


SHARE
Advertisement
Advertisement
Back to Top