Imaging retinal nerve fiber bundles at ultrahigh-speed and ultrahigh-resolution using OCT with adaptive optics

Omer Pars Kocaoglu; Barry Cense; Qiang Wang; Jeremy Bruestle; Jason Besecker; Weihua Gao; Ravi Jonnal; Donald T. Miller

doi:10.1117/12.846585

2 March 2010 Imaging retinal nerve fiber bundles at ultrahigh-speed and ultrahigh-resolution using OCT with adaptive optics

Omer Pars Kocaoglu, Barry Cense, Qiang Wang, Jeremy Bruestle, Jason Besecker, Weihua Gao, Ravi Jonnal, Donald T. Miller

Author Affiliations +

Proceedings Volume 7550, Ophthalmic Technologies XX; 755010 (2010) https://doi.org/10.1117/12.846585
Event: SPIE BiOS, 2010, San Francisco, California, United States

Abstract

Ultrahigh speed line scan detectors based on CMOS technology have been recently demonstrated in ultrahigh resolution spectral-domain optical coherence tomography (UHR-SD-OCT) for retinal imaging. While successful, fundamental tradeoffs exist been image acquisition time, image sampling density, and sensitivity, all of which impact the extent of motion artifacts, visualization of fine spatial detail, and detection of faint reflections. Here we investigate these tradeoffs for imaging retinal nerve fiber bundles (RNFBs) using UHR-SD-OCT with adaptive optics (AO). Volume scans of 3°x3° and 1.5°x1.5° were acquired at retinal locations of 3° nasal and 6° superior to the fovea on a healthy subject. Dynamic AO compensation across a 6 mm pupil provided near-diffraction-limited performance. The acquisition rates were 22.5k lines/s and 125k lines/s with A-lines spaced at 0.9 μm and 1.8 μm and B-scans at 1.8 μm and 9 μm. Focus was optimized for visualizing the retinal nerve fiber bundles (RNFBs). En face projection and crosssectional views of the RNFBs were extracted from the volumes and compared to images acquired with established conventional CCD-based line-scan camera. The projection view was found highly sensitive to eye motion artifacts, yet could only be partially compensated with coarser sampling, since fine sampling was necessary to observe the microscopic features in the RNFBs. For the cross-sectional view, speckle noise rather than eye motion artifacts limited bundle clarity. The highest B-scan density (1.8 μm spacing) coupled with B-scan averaging proved the best combination. Regardless of view, the higher line rate provided better RNFB clarity.

Citation Download Citation

Omer Pars Kocaoglu, Barry Cense, Qiang Wang, Jeremy Bruestle, Jason Besecker, Weihua Gao, Ravi Jonnal, and Donald T. Miller "Imaging retinal nerve fiber bundles at ultrahigh-speed and ultrahigh-resolution using OCT with adaptive optics", Proc. SPIE 7550, Ophthalmic Technologies XX, 755010 (2 March 2010); https://doi.org/10.1117/12.846585

ACCESS THE FULL ARTICLE

INSTITUTIONAL
Select your institution to access the SPIE Digital Library.

SELECT YOUR INSTITUTION

PERSONAL
Sign in with your SPIE account to access your personal subscriptions or to use specific features such as save to my library, sign up for alerts, save searches, etc.

PERSONAL SIGN IN

No SPIE Account? Create one

;

PURCHASE THIS CONTENT

SUBSCRIBE TO DIGITAL LIBRARY

50 downloads per 1-year subscription

Members: $195

Non-members: $335 ADD TO CART

25 downloads per 1 - year subscription

Members: $145

Non-members: $250 ADD TO CART

PURCHASE SINGLE ARTICLE