16 February 2010 Antireflection on plastic substrates using ion etching with discontinuous metallic film
Author Affiliations +
Abstract
When a plastic substrate is under a highlight, the reflected light on the substrate always dazzles the observer. To prevent the effect, anti-reflected (AR) coating is applied. However AR-coating is difficult to be designed with wide wavelength range. In this research, the discontinuous metallic films were fabricated on the plastic substrates to reduce the reflection of the plastic substrates with wide wavelength range. To reduce more reflectance, the discontinuous metallic film can also be applied as the mask of selective ion etching to achieve rough surface. The results show the average reflectance of the AR-coating on the plastic substrates has been decreased 5%. The average transmittance has been increased 3%.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Yu-Wen Yeh, Yu-Wen Yeh, Sheng-Hui Chen, Sheng-Hui Chen, Cheng-Chung Lee, Cheng-Chung Lee, Shih-Liang Ku, Shih-Liang Ku, Chao-Chun Huang, Chao-Chun Huang, } "Antireflection on plastic substrates using ion etching with discontinuous metallic film", Proc. SPIE 7591, Advanced Fabrication Technologies for Micro/Nano Optics and Photonics III, 759112 (16 February 2010); doi: 10.1117/12.842913; https://doi.org/10.1117/12.842913
PROCEEDINGS
7 PAGES


SHARE
Back to Top