Paper
5 February 2010 120 Gbps VCSEL arrays: fabrication and quality aspects
Martin Grabherr, Steffan Intemann, Christian Wimmer, Lin R. Borowski, Roger King, Dieter Wiedenmann, Roland Jäger
Author Affiliations +
Abstract
Data centers and supercomputers are driving the demand for short reach aggregate bandwidth. E.g. active CXP active optical cables (AOC) with an aggregate bandwidth of 120 Gbps [1] are being installed since about one year in some of the biggest server farms in the world. As these applications require parallel optics, obviously this is a natural playground for VCSEL technology. The 10G VCSEL platform of Philips ULM Photonics is enabling operation of such AOC at less than 3 W total power by low bias currents for the individual VCSEL as low as 3.4 mA at room temperature and 5.5 mA at 85°C ambient. In combination with ideally matched driver electronics, the launch power of the VCSELs can be stabilized within 0.15dB variation across this operating temperature range [2] and thus allow for open loop power control. With more than 108 hours of operation in the field and no field return reported, the FIT rate for the 1x12 VCSEL array can be calculated to be less than 10 FIT.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Martin Grabherr, Steffan Intemann, Christian Wimmer, Lin R. Borowski, Roger King, Dieter Wiedenmann, and Roland Jäger "120 Gbps VCSEL arrays: fabrication and quality aspects", Proc. SPIE 7615, Vertical-Cavity Surface-Emitting Lasers XIV, 761507 (5 February 2010); https://doi.org/10.1117/12.841987
Lens.org Logo
CITATIONS
Cited by 4 scholarly publications.
Advertisement
Advertisement
RIGHTS & PERMISSIONS
Get copyright permission  Get copyright permission on Copyright Marketplace
KEYWORDS
Vertical cavity surface emitting lasers

Semiconducting wafers

Temperature metrology

Modulation

Photonics

Picosecond phenomena

Interferometric modulator displays

Back to Top