5 February 2010 High-power low-noise VCSEL seed laser for fiber laser applications
Author Affiliations +
Abstract
The properties of high-power and low-noise seed lasers are key for high performance master oscillator-power amplifier (MOPA) fiber-lasers. We have successfully demonstrated high-power and low-noise seed lasers using our VCSEL technology. We used an external-cavity configuration with optimum cavity design for single-mode control, and the mode-beating problem can be fully avoided compared to the edge-emitter seed lasers. The external-cavity VCSEL achieved high-power single-mode pulsed operation with good mode quality that allowed it to be efficiently coupled into a single-mode PM or non-PM fiber. Using high-speed driving electronics, optical pulse widths of 12ns and shorter were obtained with repetition rates of up to 1 MHz. The optical output peak power obtained is over 10 W. We have also demonstrated a CW version of this high-power VCSEL seed laser achieving single transverse and longitudinal mode with an output power of greater than 0.5 W. The high-power external cavity VCSELs were operated in single longitudinal mode demonstrating narrow spectral line-width of 200kHz, and having very low RIN of -155 dBc/Hz at 1MHz, which was even lower at higher frequencies.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Baiming Guo, Qing Wang, Bing Xu, Robert van Leeuwen, Jean Francois Seurin, Guoyang Xu, Chuni Ghosh, "High-power low-noise VCSEL seed laser for fiber laser applications", Proc. SPIE 7615, Vertical-Cavity Surface-Emitting Lasers XIV, 76150H (5 February 2010); doi: 10.1117/12.842596; https://doi.org/10.1117/12.842596
PROCEEDINGS
8 PAGES


SHARE
RELATED CONTENT


Back to Top