25 November 2009 Optical liquid level sensor based on cladding-mode resonance of specialty double-cladding fiber
Author Affiliations +
Proceedings Volume 7634, Optical Sensors and Biophotonics; 76340M (2009) https://doi.org/10.1117/12.851950
Event: Asia Communications and Photonics, 2009, Shanghai, Shanghai , China
Abstract
A novel liquid-level sensor was proposed and studied by using a specialty double-cladding fiber (DCF). The sensor operates according to a light wavelength modulation method which results from the variation of the surrounding refractive index (RI). As the surrounding RI changes, the effective refractive index of cladding mode of DCF increases or decreases and the phase-matching condition changes, so does shift the resonance wavelength. In our experiments, the DCF sensor was exposed to different liquids with certified RI, and liquid levels were varied. Experimental results showed that the shift of the transmission spectra linearly depended on the fraction change of DCF immersed into the liquid. The liquid level sensitivities are 451.8 pm/mm and 1030.44 pm/mm for the different liquid with RI of 1.3514 and of 1.4286, respectively. The sensor has the advantages of large linear response range, as well as high sensitivity and simple structure et al.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Huanhuan Liu, Fufei Pang, Na Chen, Zhenyi Chen, Tingyun Wang, "Optical liquid level sensor based on cladding-mode resonance of specialty double-cladding fiber", Proc. SPIE 7634, Optical Sensors and Biophotonics, 76340M (25 November 2009); doi: 10.1117/12.851950; https://doi.org/10.1117/12.851950
PROCEEDINGS
6 PAGES


SHARE
RELATED CONTENT

Fiber optic evanescent-wave sensor
Proceedings of SPIE (February 14 2005)
Living waveguides
Proceedings of SPIE (November 03 2003)
Fiber Optic Sensors: An Overview
Proceedings of SPIE (September 17 1984)

Back to Top