25 November 2009 3D endoscopic optical coherence tomography based on rapid-scanning MEMS mirrors
Author Affiliations +
Proceedings Volume 7634, Optical Sensors and Biophotonics; 76340X (2009) https://doi.org/10.1117/12.853201
Event: Asia Communications and Photonics, 2009, Shanghai, Shanghai , China
The paper reports 3D in vivo endoscopic imaging enabled by integrating rapid-scanning MEMS mirrors into an optical coherence tomography (OCT) imaging probe. OCT provides high-resolution cross-sectional information suitable for in vivo noninvasive early cancer diagnosis. However, conventional OCT systems are bulky and slow, and thus are difficult to apply to internal organs where most cancers are originated. Microelectromechanical systems (MEMS) technology offers the advantages of small size and fast speed and can be used to miniaturize optical imaging probes. The MEMS mirrors have large aperture size (1 mm × 1 mm), large scan range (> ±25°) and low drive voltage (< 10 V). A 5.8mm-diameter FEB-protected MEMS-OCT has been built and 3D OCT images of live mice have been successfully acquired with a resolution of ~10μm and a frame rate of 2.5 frames per second.
© (2009) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Huikai Xie, Huikai Xie, Jingjing Sun, Jingjing Sun, Shuguang Guo, Shuguang Guo, Lei Wu, Lei Wu, } "3D endoscopic optical coherence tomography based on rapid-scanning MEMS mirrors", Proc. SPIE 7634, Optical Sensors and Biophotonics, 76340X (25 November 2009); doi: 10.1117/12.853201; https://doi.org/10.1117/12.853201

Back to Top