9 April 2010 Free space optical coupling of reflection-based fiber Bragg grating sensors
Author Affiliations +
Abstract
In this paper, a robust free space optical coupling of reflection-based fiber Bragg grating (FBG) sensors is presented. Fiber Bragg grating (FBG) sensors have shown great utility for integrity management and environmental sensing of composite structures. However, they suffer from cumbersome and fragile techniques for bringing the sensing light into and out of the structure since the optical fiber must be routed through the surface of the composite (i.e. pigtailing). In our approach, 45-degree-angled mirrors integrated into fibers were used as an input and output coupling technique. With the difficulty of directly free space coupling to the tiny single mode fiber (SMF), a novel method of coupling to the sensor via splicing and fusing a multimode fiber (MMF) to the single mode FBG (SMFBG) was explored. Using this method, we have previously demonstrated free space optical coupling to transmission-based FBG sensors embedded inside a composite panel. In this paper, we are able to interrogate un-embedded sensors with reflected light using 45-degree-angled mirrors. We have also performed preliminary investigation on FBG sensors embedded in a composite panel. We conclude that this novel space coupling method can be used to effectively couple the transmitted and reflected light for FBG sensors.
© (2010) COPYRIGHT Society of Photo-Optical Instrumentation Engineers (SPIE). Downloading of the abstract is permitted for personal use only.
Liang Qiu, Keith W. Goossen, Dirk Heider, Daniel J. O'Brien, Eric D. Wetzel, "Free space optical coupling of reflection-based fiber Bragg grating sensors", Proc. SPIE 7643, Active and Passive Smart Structures and Integrated Systems 2010, 764326 (9 April 2010); doi: 10.1117/12.848394; https://doi.org/10.1117/12.848394
PROCEEDINGS
9 PAGES


SHARE
Back to Top